Are you the proud owner of a cracked phone screen? Has your broken device been making it difficult for you to make and receive calls, texts or emails? Do you dread the idea of taking it into an expensive repair shop or waiting weeks for a replacement part to arrive in the mail? If so, this article is for you!
In this step-by-step guide, we’ll cover how to replace a cracked screen on your own. You don’t need any special tools or skills; all that’s required is some patience and dedication. We’ll walk you through everything from sourcing the right type of replacement parts to successfully completing installation—all without having to pay someone else to do it.
Take heart: replacing a cracked screen doesn’t have to be complicated or costly. With our help, anyone can become an amateur DIY tech expert capable of tackling their own repairs with confidence. Read on to learn more about safely and effectively replacing a cracked phone screen yourself!
1. Gather The Necessary Tools And Materials
Replacing a cracked screen can often be daunting, but it doesn’t have to be. To ensure the best results in replacing your own cracked screen, you’ll need to assemble all of the necessary tools and materials first. This is an important step as having the correct items on hand will make the repair process much easier.
Gather together adhesive tape, safety glasses, screwdrivers (both Phillips head and flathead), tweezers, cleaning cloths or wipes, precision knife or scissors, and new replacement parts like a touchscreen digitiser or LCD display panel. It’s also helpful to have some plastic opening tools on hand for prying open cases without damaging them too much. Additionally, if you’re using any kind of glue-based adhesive during the repair process then grab some gloves so that you don’t get stuck with messy fingers after!
Once everything is ready, you’re all set to begin replacing your cracked screen – no expert help needed! With patience and care during each step, anyone can accomplish this task successfully. So don’t be intimidated; just remember these tips and start gathering supplies today to replace your device’s broken screen quickly and easily.
2. Disassemble The Device
Now that you have the necessary tools and materials, it’s time to start disassembling your device. This step can be a bit tricky so make sure to pay attention throughout the process.
To begin with, use something like a plastic opening tool or spudger to remove any screws securing the back cover of the device. After that is complete, carefully peel away any remaining adhesive from around the edges. Caution should also be taken when removing cables connected to components such as speakers, cameras, and other sensors. If possible, try leaving them attached until after you’ve replaced the screen.
At this point in the process, all components (except for those holding on the screen) should be removed from your device. Since replacing a cracked screen requires special knowledge and skills, consider visiting a professional if things become too difficult or complicated.
3. Inspect The Damage
Now that you’ve disassembled the device, it’s time to inspect the damage. Take a close look at where the screen has cracked and determine if any other components have been affected or need replacing. If there are any cracks in other parts of your phone—like its frame or back panel—you should replace them as well.
It’s important that you double check all areas for potential problems before you move on to the next step. Look out for signs of corrosion, water damage, frayed wires, burned out connectors and more. You never know what kind of hidden dangers could be lurking beneath the surface!
The inspection process is critical when attempting this repair yourself. So take your time and make sure everything looks good before proceeding further with the project. Your patience now will save you from costly mistakes later on down the road.
4. Remove The Old Screen
Now that you’ve inspected the damage to the cracked screen, it’s time to move on and remove it. This is where things get a bit tricky – but with patience and care, you can do it! Start by removing any external components such as screws or clasps. It’s important to be careful here, so make sure you’re using the proper tools for the job. Once all of those are taken off, gently pry up each side of the device until the old screen comes out.
When doing this step, it’s crucial that you work slowly and carefully because rushing could cause more damage or even break your phone completely. You’ll want to use something like a spudger tool or tweezers to help separate the parts without causing further harm. Another thing to keep in mind is that if there’s extra adhesive between the frame and display assembly then don’t try to force them apart – instead find a way around them using gentle pressure.
Finally, once everything is disassembled safely, set aside all of your pieces in an orderly fashion so they won’t get mixed up during reassembly. Keep track of which pieces go where; labeling them may be helpful if needed. With thoughtful preparation and attention-to-detail throughout these steps, replacing your own cracked screen will become much easier!
5. Prepare The New Screen For Installation
Now that the old screen has been removed, it’s time to prepare the new one for installation. Firstly, ensure you have all of the necessary pieces and components needed to install your replacement screen. This includes any screws, protective plates or brackets in addition to the actual display unit itself.
Once these items are accounted for, gently place the new screen into its frame and secure it with a few screws. After doing so, check that everything is firmly secured before continuing onto the next step.
The last thing to do is clean off any dust particles from around the edges of the frame and verify that there are no gaps between each component part. Once this verification is complete and you’re satisfied with how everything looks, you can proceed with installing your newly fixed screen!
6. Attach The New Screen
Now that the new screen is ready for installation, it’s time to attach it. This step requires a great deal of precision and patience – if done incorrectly, you may end up with an even bigger problem than when you started!
First, make sure the cables from the new screen match up perfectly with those in your device. Then carefully place the new screen onto its housing, making sure not to force anything into place. It should fit snugly without too much effort. Once everything lines up correctly, use screws or adhesive strips (depending on what type of device you have) to secure the new screen in place.
Finally, check all connections again before powering on your device. Make sure everything looks right – if so, you can turn on your device and enjoy your freshly replaced cracked screen!
7. Reconnect The Internal Components
Now that the new screen is attached, it’s time to reconnect the internal components. This step will require you to be precise and careful—if done incorrectly, it could lead to further damage.
Start by disconnecting any wires from your old screen. Then remove the screws on the back panel of your device which hold it in place. After dismantling the old panel, put aside all of its pieces before attaching them onto the new one.
Finally, align and secure each component inside the frame with care. Connect the wires correctly and use caution when installing each part so as not to disrupt other connections or cause additional damage. You can then replace the back panel and test out your newly-installed screen!
8. Test The New Screen
Now that all the internal components are reconnected, it’s time to test the new screen. This is a crucial step in replacing a cracked screen on your own as any mistakes made could cause further damage.
Before testing out the device, you should make sure everything has been connected correctly and securely. It’s important for each connection to be firmly attached so that nothing gets damaged during use. Once you’re confident everything is secure, turn on the device and see if it works properly.
Look out for any signs of poor performance or visual issues like flickering screens or incorrect colours. If there are no problems detected, congratulations! You’ve successfully replaced your cracked screen without needing help from an expert tech repair shop.
9. Reassemble The Device
Reassembling the device is an important step in replacing a cracked screen. It requires patience and attention to detail, so take your time while completing this task.
First off, gather all of the components that you removed when taking apart your device. You’ll have screws, panels, and other pieces necessary for putting it back together. Be sure not to leave anything out! Here’s a checklist:
- Screws:
- Large ones
- Small ones
- Panels:
- Front panel
- Battery cover
- Other Parts:
- Screen bracket
- Camera lens cover
Now comes the tricky part – actually reassembling everything! Make sure each component is securely attached; if any parts aren’t fastened with enough pressure, they could come loose later on. Once every piece has been placed correctly, go over each connection one more time just to double check your work. Finally, test the new screen again before putting it away or using it as normal – make sure nothing was damaged in the process!
10. Troubleshoot Common Issues
After reassembling the device, it’s time to troubleshoot any common issues. This step ensures that our work was done correctly and that the device is functioning properly.
First, check if all components are working as expected. Check each piece individually and make sure they’re connected securely to their respective port or slot. Next, test out the new display by turning on the device and making sure there are no visual anomalies like flickering lines or discoloration. Lastly, give a once-over of your handiwork for good measure – look for small details like fingerprints smudges or unconnected cables.
If everything looks good thus far, then you can now enjoy your repaired device! Congratulations on successfully replacing a cracked screen on your own!
Conclusion
In conclusion, replacing a cracked screen on your own can be quite an undertaking. It’s important to have the right tools and materials before beginning the process, as well as a thorough understanding of each step involved in replacing the screen. While this process may seem overwhelming at first, with careful preparation and attention to detail it is possible to successfully replace the cracked screen without needing to hire a professional. Taking the time to properly disassemble, inspect, remove and prepare components for installation will help ensure that you get the best results when installing your new screen. With patience and practice, anyone can learn how to replace their device’s cracked screen on their own.
